Hardware components that may be needed in building an arcade.
Arcade Feet Leg Levelers
Arcade feet leg levelers fits most arcade machines, pinball machines, claw machines, and others games.
Select options
This product has multiple variants. The options may be chosen on the product page
Arcade Marquee Retainer Trim (2pcs) 29 Inches (74cm)
Cocktail Table 1″ Top Glass Clips | 1.25″ Opening | Set of 8 | Midway Style
These are the best Cocktail Table Arcade Top Glass clips you will find. They are powder black powder coated (matte) and are designed to mimic the original Midway style cocktail table glass clips, only better
- This design adds two additional holes for screws. This is very handy when using these as "replacement clips" as they give you two additional holes in case your original is stripped out.
- Additionally the top of the clip is bent just slightly more than 90° to make for a very snug fit. This is important as glass varies in thickness and many people choose not to have a graphic underlayment on their table.
Cocktail Table 3/4″ Top Glass Clips | 1″ Opening | Set of 8 | Midway Style
These are the best Cocktail Table Arcade Top Glass clips you will find. They are powder black powder coated (matte) and are designed to mimic the original Midway style cocktail table glass clips, only better
- This design adds two additional holes for screws. This is very handy when using these as "replacement clips" as they give you two additional holes in case your original is stripped out.
- Additionally the top of the clip is bent just slightly more than 90° to make for a very snug fit. This is important as glass varies in thickness and many people choose not to have a graphic underlayment on their table.
