12 thoughts on “See My Radio Stack and MCP in Action

  1. Bonjour,
    Je suis interessé de votre construction du MCP, pouvez-vous me communiquer les plans de montage des composants électroniques ainsi que les codes de programmation des cartes arduino
    merci de me répondre

    1. Fess_ter_Geek

      The Real Person!

      Author Fess_ter_Geek acts as a real person and verified as not a bot.
      Passed all tests against spam bots. Anti-Spam by CleanTalk.

      The Real Person!

      Author Fess_ter_Geek acts as a real person and verified as not a bot.
      Passed all tests against spam bots. Anti-Spam by CleanTalk.
      says:

      Désolé je ne peux pas. Il faudrait trop de temps . Il est encore trop complexe.

      ~Fess
      Not a Butt Cheek

  2. Mais pouvez-vous me communiquer comment vous effectuez les affichages LED 7 segments avec les barrettes MAX7219 8 chiffres pour les parties de 3 chiffres et les parties de 5 chiffres avec les espaces utilisés sur la présentation de votre .
    Merci de me répondre

    1. Fess_ter_Geek

      The Real Person!

      Author Fess_ter_Geek acts as a real person and verified as not a bot.
      Passed all tests against spam bots. Anti-Spam by CleanTalk.

      The Real Person!

      Author Fess_ter_Geek acts as a real person and verified as not a bot.
      Passed all tests against spam bots. Anti-Spam by CleanTalk.
      says:

      Its a trick. An illusion.
      For a 3 digit display, I hide one digit behind the face plate.
      For a 5 digit display I put two 4 digit displays side by side and then hide 3 digit spaces behind the face plate.

      ~Fess

      1. Is this the only way to do it – is it possible to daisy chain single digit displays to get exactly the size of display you need? Or does that not work? I take it you’re using Mobiflight (or Link2fs). Great job by the way, looks fantastic!

        Regards.

        1. The Modules are divided into two 4 digit units. You might be able to wire a single 7 segment using a Max7219 module but it would limit the usability of the Max7219 and you would probably have to use the binary code to light it up. Its easier to just hide unneeded digits behind the panel.
          I started using Link2FS but am fully using LUA thru FSUIPC now on the Radio, MCP and a Switch Panel I made for the A2A Comanche on P3D.

  3. Hi there
    I like your project (FCU) and I would like to have one as I couldn’t build it and it’s extremely expensive to buy it. I am wondering if you could buy it through you with a reasonable price.
    thank in Advance.

    1. Aimen wrote: Hi there
      I like your project (FCU) and I would like to have one as I couldn’t build it and it’s extremely expensive to buy it. I am wondering if you could buy it through you with a reasonable price.
      thank in Advance.

      Sorry, with the money and time that I put in, it would take an outrageous amount for me to sell.
      ~Fess

  4. GOOD LUCK I’M WITH PROBLEMS ONLY WITH VERTICAL SPEED, THE DISPLAY DOES NOT SHOW VALUE (-) AND NOR (+) AND IS ALWAYS 100 FEET AT LEAST ON THE DISPLAY, IF THE REAL FOR 700 HE SHOWS 600 FEET, WHAT COULD BE.

    Thank you to help me

  5. Hello, I want to build my MCP synonymous, I looked in the programming details and I saw that to control the buttons “SPEED” or “SPD / MACH” is used codes ZZ788280 and ZZ788270, I searched On the net a file giving me the “ZZ” match of the other buttons that can be used.
    If someone can give me the address or the site on which I can find this file. Thank you very much for the answer.
    Daniel

Leave a Reply

Your email address will not be published. Required fields are marked *